Backup Exec slow Exchange Mailbox Backup [Solved]

I had a problem with a slow backup performance of Backup Exec.
The whole process took around 12 hours for the mailboxes only ~32GB.

The problem was at least in my case that around the same time of the backup, a database maintenance job was running. It was set to start around 4am.

You can change the schedule of the database job in ESM ==> Server ==> <your exchange server> ==> First Storage Group ==> [tab] Database ==> Maintenance Interval ==> [Customize]

Now you can set your own maintenance schedule which off course does not interfere with your backup schedule.
Hope this will help you in solving slow backups of your exchange mailboxes with backup exec.

 

Comments

Post a Comment

Popular posts from this blog

Exchange Server Error -1018: How Microsoft IT Recovers Damaged Exchange Databases

Image
I found this paper on the showcase site from microsoft I hope it is of help to you. It sure helped me!     Technical White Paper Published: August 1, 2005 Executive Summary Error –1018 (JET_errReadVerifyFailure) is a familiar—and dreaded—error in Microsoft® Exchange Server. It indicates that an Exchange database file has been damaged by a failure or problem in the underlying file system or hardware. This paper explains the conditions that result in error –1018. It also covers the detection mechanisms that Exchange uses to discover and recover from damage to its database files. The Microsoft Information Technology group (Microsoft IT) runs one of the most extensive Exchange Server organizations in the world. Exchange administrators at Microsoft have investigated and recovered from dozens of –1018 error problems. This paper shows you how Microsoft IT monitors fo
Read more

Server and Domain Isolation Using IPsec and Group Policy

Image
Microsoft Solutions for Security and Compliance Server and Domain Isolation Using IPsec and Group Policy © 2006 Microsoft Corporation. This work is licensed under the Creative Commons Attribution-NonCommercial License. To view a copy of this license, visit http://creativecommons.org/licenses/by-nc/2.5/ or send a letter to Creative Commons, 543 Howard Street, 5th Floor, San Francisco, California, 94105, USA. Table of Contents Chapter 1: Introduction to Server and Domain Isolation. 1 Executive Summary. 1 Who Should Read This Guide. 2 The Business Challenge. 3 The Business Benefits. 3 The Technology Challenge. 4 Creating a Project Team.. 6 Guide Overview.. 7 Chapter 1: Introduction to Server and Domain Isolation. 7 Chapter 2: Understanding Server and Domain Isolation. 7 Chapter 3: Determining the Current State of Your IT Infrastructure. 7 Chapter 4: Designing and Planning Isolation Groups. 8 Chapter 5: Creating IPsec Policies for Isolation Groups.
Read more

[Solved] The Group Policy client-side extension Internet Explorer Zonemapping failed to execute

Image
I had the error below in my application eventlog.     Event Type:    Error Event Source:    Userenv Event Category:    None Event ID:    1085 Date:        30-09-2008 Time:        15:20:30 User:        NT AUTHORITY\SYSTEM Computer:    TBG-TS01 Description: The Group Policy client-side extension Internet Explorer Zonemapping failed to execute. Please look for any errors reported earlier by that extension. For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp .   My problem was with my site to zone assignment list I used a wildcard like this: “ *microsoft.com ” but what you need to do is this “ *.microsoft.com ” So it is safe to say that the documentation from microsoft needs some sort of an update stating that you can only use a wildcard infront of dot. Below is the microsoft explaination:   This policy setting allows you to manage a list of sites that you want to associate with a particular s
Read more